Coolants
The 48-Hour Pressure Test: Why CGP Runs Every Loop at Full Load
Every water-cooled PC leaks eventually — unless the leak is found before the machine ships. That is the idea behind the CGP test protocol:…
Read Entry// SYS_BLOG
Notes From
The Forge.
Build diaries, coolant chemistry, and loop architecture — written by the hands that bend the tubes. No spec-sheet fluff, only what survived the forge floor.
FIELD NOTES BUILD DIARIES 0 FLUFF
ENTRY_367 // FEATURED
Featured Entry
Maintaining Your Water-Cooled PC: A 12-Month Checklist
Coolants 3 MIN READ
A well-built water loop is nearly maintenance-free — nearly. The one component that ages is the fluid. Biocide degrades, corrosion inhibitors deplete, and dye fades. Twelve months is the right interval for a full service: drain, clean, inspect, refill. Here is the checklist we…
Read The EntryAll Entries
The Forge,
documented.
Loop Architecture
GPU Water Blocks: What Actually Matters
A GPU water block looks like a simple metal slab, but it is the most engineered part in a custom loop. It sits on…
Read Entry
Loop Architecture
How to Choose the Right Radiator for Your Loop
Every component in a water-cooled loop moves heat. The pump pushes it, the blocks collect it, the tubing carries it. The radiator is the…
Read Entry
Coolants
Choosing Coolant for a Loop That Lasts
Coolant is the one component you will replace more than any other. Here is how to choose a fluid that keeps your loop clean…
Read Entry
Loop Architecture
The Craft of Bending Hardline Tubing
A perfect bend is measured in millimeters. Inside the Hotwheel, every tube is cut, heated, and bent by hand — and no two runs…
Read Entry
Coolants
Air vs. Custom Water Cooling in Riyadh Heat
Riyadh summers push ambient temperatures past 45°C. Here is what that does to your components — and why a custom loop changes the math.
Read Entry// SYS_COMMISSION
Enough Reading —
Time To Forge Yours.
The next entry could be about your machine. Open the configurator and start the build diary of your own commission.